Current Position: Home > News

Cemented carbide density tester and the density performance of cemented carbide

Time:2020-07-21 11:38:41 Click:

The cemented carbide density tester can be adapted to the density detection in the fields of powder metallurgy and alloy products. It adopts the Archimedes principle and has the characteristics of adjustable measurement accuracy, stable performance, simple operation, and durability. With standard RS-232 computer interface, you can easily connect a printer or computer.

The mass of a unit volume of cemented carbide, its volume generally includes the volume of voids in the material, usually expressed in g/cm3. The theoretical density of the alloy analyzed by the cemented carbide density tester manufacturer can be calculated according to the following formula:


Among them, da, db, dc represent the theoretical density of component A, component B, and component C, respectively, and x, y, and z represent the quality scores of component A, B, and C, respectively. The formula for calculating porosity in the alloy is:


Among them, P is the porosity in the alloy,% (volume fraction); d is the actual density of the alloy, and d0 is the theoretical density of the alloy.

The density determination method of cemented carbide stipulates: when weighing a sample within 10g, the sensitivity of the balance should be 0.1mg, and the sensitivity of the sample above 10g should be 0.001% of the weighing; the container size should be selected appropriately, if it is greater than 10cm3 When the sample is put into the liquid, the rise of the liquid level is not more than 2.5mm, and the liquid is distilled water or deionized degassed water.

Density is an important product quality index of cemented carbide. Under the condition of a certain composition, the density reflects the structure of the alloy. When the porosity in the alloy is large or there is free carbon, the density is low. When the eta phase appears in the alloy, the density is higher. The main factors affecting the porosity and density of the alloy are insufficient wet grinding time, low green compact density, incomplete degassing, insufficient sintering temperature and time, and mixing of impurities.

The cemented carbide density tester has high accuracy for alloy density measurement, and it is your best choice!

Copyright © 2012-2020 Shanghai Husheng Industrial Co., Ltd. All Right  

Add:Room 905, Building 5, Lane 299, Jiangchang West Road, Jing'an District, Shanghai Tel:13801707814 E-mail: